Home >> Techniques

Automobile lamp_cover lens mold_right_left_front_back lamp,cover lens mold making-DongGuan JK-MOLD

Automobile lamp_cover lens mold_right_left_front_back lamp,cover lens mold making-DongGuan JK-MOLD
Automobile lens mold:
1)raw material is GE143-111PC
2)mail core and cavity steel is M300,whether need to do hardness treatment according to the part quantity required.
3)sprue gate and individual side gate
4)DME equivalent standard parts,LKM moldbase and the steel is 1050

Structure characteristic,no slider and no lefter,big curve parting line surface and need to do interlock system
between core plate and cavity plate.We did many kinds of lens mold with different size.The biggest one we built is
500x80x170mm.Since it is transparent PC,the gate location and size is a key point to the success mold building.
Spue and side gate combination is the best choice.

Also it is transparent part,high surface quality required,no ejector mark,no welding lines,no any flash around the adge.
So the ejection system design is very interesting for the lens mold making.
More details pls contact DongGuan JK-MOLD for any inquiry.
Artical come from JK-MOLD.www.jk-mold.com

 

【 Hits: 】 【 add time:2011-4-3 17:20:29 】 【 Close this page